R V Associates
R V Associates
Choolaimedu, Chennai, Tamil Nadu
SEND SMS
SEND EMAIL

STP ETP Controller

Compact, low cost controller with in built logic for waste-water application can be integrated with panels of any capacity plant. These controller make any plant operation completely automatic  this controller comes ready with RS485 communication port which can be used for BMS/SCADA/Remote Monitoring System.

STP/ETP Matic Controller

STP/ETP Matic Controller
  • STP/ETP Matic Controller
Ask For Price
Product Price :Get Latest Price

Product Details:

Cutout Size140 x 140 mm
Display16 x 2 alphanumeric display
EnclosureHeavy duty extruded Aluminum with ABS front plate
MountingPanel/Field
Supply230 V A.C. plus minus 10 percent
Cable TerminationRear Terminals
Overall Size144 (H) x 144 (V) x 125 (D) mm

We offer an impeccable range of STP/ETP Matic Controller to our esteemed clients. This instrument is manufactured, keeping in mind the latest market trends using optimum quality raw material and cutting-edge technology, in line with set industry standards. The entire range is well-known for its unique applications. Apart from this, clients can avail this product at nominal prices.

Salient Features:
  • Heavy duty extruded Aluminum enclosure with ABS front plate
  • 16 X 2 alphanumeric display & Mimic diagram with 8 LEDs
  • Complete ETP/STP logic preprogrammed
  • Drains the sludge periodically
  • Automatically switches over to stand-by motor or blower after a preset time
  • All settings are password protected(can be done through 3 front keys)
  • Inbuilt operation hour meter
  • RS 485 O/P for data logging (local or remote)
  • 2 Flow sensor inputs (turbine type)
  • 2 Analog inputs (can be configured as PH/ORP/DO/Flow)

Technical Specification:
Inputs:
  • 4 Switch inputs
  • Effluent Tank Level
  • MBR Tank Level
  • Blower Input
  • Remote fault

Output:
  • Controls
  • Effluent Feed Pump (1+1)
  • Filter Feed Pump (1+1)
  • Sludge Valve/Pump
  • Alarm or Control Delay
Request
Callback


Additional Information:

  • Item Code: STP-ETP-Matic
Yes! I am Interested
View PDF

Astero STP Controller

Astero STP Controller
  • Astero STP Controller
Ask For Price
Product Price :Get Latest Price

Product Details:

Dimension144x144 mm
BrandAstero
Frequency400 MHz
Accuracy+/- 2% FSD
Resolution800x480 Pixels
Voltage220 V
Surface TreatmentColor Coated
Power SourceElectric
Phase2

Compact microprocessor based plug & play controller with plant operation preprogrammed and all safeties inbuilt. These controllers along with the required level switches help in making the entire plant completely automatic. 

Key attributes:
  • Complete influent (effluent/sewage) treatment logic programmed
  • Mimic diagram with 6 leds for i/o indication, separate led for fault
  • 16x2 alphanumeric lcd display with keypad for programming
  • Automatically drains the sludge after a set period,
  • Takes care of required motor protection such as overload/single phasing/dry running
  • Auto/manual facility (even in manual mode, motor protection doesn’t get bypassed )
  • In built flow rate indicator with totaliser
  • In built operation hour counter
  • In built time out facility, panel itself can work as recovery agent 
  • Password protected settings

Models Available:Astero 131:
  • For Influent Transfer Pump 1 , Air Blower 3 , Filter Feed Pump 3

Astero 333:
  • For Influent Transfer Pump 3, Air Blower 3 , Filter Feed Pump 3

Available Options:
  • Available with remote monitoring(SMS facility)'
Request
Callback
Yes! I am Interested

STP-Matic NG Controller

STP-Matic NG Controller
  • STP-Matic NG Controller
Ask For Price
Product Price :Get Latest Price

Product Details:

Capacity Inlet Flow Rate500 m3/hour
Voltage220 V
Power SourceElectric
Frequency50/60 Hz
MaterialSS
ModelSTP-Matic NG

Unique microprocessor based controller ideally suitable for most waste water treatment plant with facility to control feed pump, blower, sludge pump and transfer pump. Each drive can be automatically switched over to its standby drive after a set time interval. An integral process mimic diagram with LED indicators along with a two line alphanumeric display ensures easy understanding of the status of operation of the plant. This controller can be easily integrated with panels on any capacity system and prove to be a cost effective solution over conventional PLCs.

Salient features:
  • Complete Influent Treatment operating logic inbuilt
  • 20 X 4 alphanumeric display with keypad for programming and setting
  • Mimic diagram with 13 LED annunciator
  • Inbuilt flow rate indicator and totaliser
  • Inbuilt operation hour meter
  • Time lock facility
  • Automatically switches over to stand-by motor or blower after a preset time

Switch inputs:
  • Equilisation tank
  • Settling Tank Level
  • Clarified Water Tank
  • Remote Fault/Motor Overload

Analog input:
  • Blower Current
  • Flow
  • Dissolved Oxygen
  • pH

Potential output:
  • Inffluent Transfer Pump(2)
  • Air Blower(3)
  • Sludge Transfer Pump(2)
  • Filter Feed Pump(2)
  • Alarm
  • RS 485 O/P for remote transfer

Accessories as require:
  • Flow Sensor
  • pH Transmitter
  • Mag Flow meter
  • Dissolved Oxygen meter
  • 2 Analog inputs (can be configured as PH/ORP/DO/Flow)
Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Rv Ramasubramanian (Proprietor)
B-4, Pandian Avenue, New Market Street
Choolaimedu, Chennai- 600094, Tamil Nadu, India



Call Us

Share Us

F GT L


Send E-mailSend SMS