RO Controller

Product Details:

Astero-Min controller for automatic and trouble free operation of Astero Reverse Osmosis Plant Controller. It comes with in built logic and can be integrated with panels of any capacity plant. Astero-Mini automates the RO plant by controlling the Raw Water Pump,High Pressure Pump,Flushing Solenoid Valve, Transfer Pump and Alarm and takes input from various sensors.

Features:

• Complete Ro logic in built
• Suitable for RO plant of any capacity
• 2 line alphanumeric display to show plant status and parameters
• Mimic diagram with 8 LED annunciators
• 5 key buttons to make operating easy
• Automatically flushesthe membrane during starting,stopping and after a set period
• Auto/Manual facility
• In built flow rate indicator with Totaliser
• In built operation hour counter
• In built conductivity/TDS indicator
• Equipped to suit auto multiport valve in pre treatment
• Password protected setting
• Easy wiring through rear terminal strip

Switch Inputs:

• RWT or ORP or Trnsfer Pump Input
• Low Pressure Switch
• High Pressure Switch
• TWT Level
• Dosing Tank Low level or Remote Fault or Transfer Pump input

Potental Free Outputs:

• RW Pump
• HP Pump
• Flush Valve
• Alarm or Transfer Pump

Accessory as Required:

• Flow Sensor
• Low Level Switch
• Floaties(2)
• Low Pressure Switch
• High Pressure Switch

Additional Information:

• Item Code: Astero-Mini

Product Details:

Compact microprocessor based PLUG & PLAY controller with plant operation programmed and all safties inbuilt. Controller comes with in built modem to transfer date through SMS.The modem is configuared to suit SIM card of any telecom service provider. It will send plant status and trip alert to maximum 3 mobile numbers. The SMS frequency and mobile numbers are user settable

Controller will send below parameter in plant status message:

• Conductivity/TDS
• RO Permeate Flow Rate
• RO Permeate Volume
• RO Inlet Flow Rate
• RO Operation Hour
• Feed Pump Current
• High Pressure Current
• Plant Status
• Inlet & Reject Pressure(If PT is connected)

Faults/Alerts:

Controller will trip the plant if below faults occur and send alert message to user:

• Conductivity/TDS High
• Voltage(under or over) Trip
• Low Pressure trip
• High Pressure Trip
• Treated Water Tank Full
• Dosing Tank Level Low
• RWP Dry Running, Single Phasing, Overload
• HPP Dry Running, Single Phasing, Overload

Additional Information:

• Item Code: Astero-RM

Product Details:

Simple, user friendly, PLUG & PLAY Controller with plant operation preprogrammed and all safeties inbuilt These controllers along with the required level & pressure switch help in making the entire plant completely automatic.

Key Attributes:

• Complete RO Logic Programmed
• Mimic Diagram with Different Colored Leds for I/O Indication
• 4 Digit Led Display
• No Need of Programming
• Flushes the Membrane During Starting and Stopping
• Takes Care Of Required Motor Protection Such as Overload/Single Phasing
• Auto/Manual Facility (Even in Manual Mode, Motor Protection Doesn’T Get Bypassed)
• Easy Overload Current Settings Through Knob
• Individual Switch to Start/Stop Raw Water and High Pressure Pump in Manual Mode

Product Details:

The reverse osmosis controller could measure the conductivity, pH, ORP, Flow of the product and feed water, and the RO controller could give signals to the pumps and vales as needed. An integral process mimic diagram with LED indicators along with a two line alphanumeric display ensures easy understanding of the status of operation of the plant. This controller can be easily integrated with panels on any capacity system and prove to be a cost effective solution over conventional PLCs.

 

Features:

• Complete RO operating logic in built
• 4 Line alphanumeric display with keypad for programming & display
• Mimic diagram with 8 LED annunciator
• In built conductivity/TDS meter
• In built operation hour counter
• Time lock facility
• Notification for filter backwash and membrane cleaning

 

Switch inputs:

• RWT Level
• Low Pressure Switch
• High Pressure Switch
• TWT Level
• Dosing tank Level/LPS2/Feed Pump Input
• TWT Low Level Switch

 

Analog Inputs:

• Can be configured as pH/ORP/Pressure/Temperature
• Potential free Output
• RW Pump
• HP Pump
• Flush valve
• Flush valve 2
• Dump valve
• Alarm
• Transfer Pump
• Cleaning/Flushing Pump/HP Pup2/Feed Pump
• RS485 for remote data transfer

 

Accessory as Required:

• 2 Flow Sensor
• Smart transmitter
• Pressure/Temperature transmitter

Product Details:

We are the highly coveted and widely acclaimed for offering RO Matic Controller. This is available in a variety of models and can also be customized as per the specific requirements of our clients. This product is manufactured by our expert personnel using the best quality raw material and advanced technology in our sophisticated manufacturing unit in order to meet the industry specified parameters. Further this range is available in market at pocket friendly rates.

Features:

• Complete RO operating logic in built
• 2 Line alphanumeric display with keypad for programming & display
• Mimic diagram with 8 LED annunciator
• In built conductivity meter
• In built Flow meter 2 channel
• In built pH/Temperature/Pressure
• In built ORP/Temperature/Pressure
• RS 485 output for remote data transfer
• Remote monitoring (optional)
• SMS alerts (optional)

Specification:
Input:

• 6 other switch inputs
• RWT Level
• Low Pressure Switch
• High Pressure Switch
• TWT Level
• Dosing Tank Low Level
• TWT Low Level Switch

Outputs:

• 8 potential free outputs
• Raw Water Pump
• HP Pump
• Flush Valve
• Dump Valve
• Dosing Pump
• Alarm
• Transfer Pump
• Cleaning/Flushing Pump

Product Details:

With enriched industrial experience and knowledge, we are providing an excellent range of UF Matic RO Controller to our clients. Designed and manufactured with utmost precision, the offered product is manufactured using optimum quality components and advanced technology. In addition to this, our product undergoes various tests under the supervision of quality controllers, in order to ensure their flawlessness. The offered product has immense application in electronic and electrical circuit.

Features:

• Heavy duty extruded Aluminum box with ABS front plate
• Rear terminal strip for ease of wiring
• Universal; Suitable for any logic & for all type of membranes
• User settable; Up to 10 valves & 2 pumps programmable at site
• All timings are settable at site
• Can program up to 30 steps
• User settable frequency for CEB & Backwash cycles
• Settable pump ON & pump OFF delay avoids water hammering
• One Flow input (with inbuilt totalizer)
• Separate LED for every input & output
• Can be used even for MB automation

Technical Specification:

Additional Information:

• Item Code: UF-Matic

Product Details:

We offer high performance Astero RO Controller that are widely used to automate an assortment of industrial processes.

Features:

• Astero microprocessor based controller are ideally suited for small and medium sized RO plants
• Complete operating logic of the process is preprogrammed
• Notification for filter backwash and due plant service
• Inputs from LPS, HPS and Level Switch (LS)
• Four outputs in the correct operating sequence namely Raw water pump (RWP), High pressure pump (HPP) Flushing solenoid valve (RL2) and Cleaning Pump (CP) Doser
• The electronics take care of required motor protection such as overload, dry running, single phasing and high conductivity
• Debounce time. (In built debounce time to avoid chattering of high pressure pump contactor due to initial dipping in suction pressure)
• Time based flushing
• New improved RO controller with additional features such in built conductivity, one auxiliary input (can be configured as RWLVL, RL2, ORP, Dosing, TP I/P)

Other Application:

• Auto multiport Valve
• Hydropneumatic
• Ultra Filtration
• Waste water treatment

Product Details:

Backed by our rich industrial experience in this domain we are committed towards offering finest quality Aestro 1MP RO Logic Controllers. It is a digital computer which is used for the automation process in electromechanical process. This controller is well tested against every quality parameter to avoid any type of fault at the clients' end. Our offered product can avail by our clients at pocket friendly prices in various specifications as per their needs. Astero 1 (P)/3(P) MP Panel is ideal suited for small RO/Automatic water treatment plants:

Features:

• Start/Stop button
• LS/PS bypass switch to bypass Low pressure switch/Level switch
• LED indications for Power/Pump running OK/LPS/HPS/Overload/Auto flushing
• Built in Auto flushing time-selectable
• Delay timer to protect HPP against power surges and chattering
• High pressure pump will trip only if LPS remains off more than 5-7 sec. Hence avoid any chattering of pump

Technical Specification:

Additional Information:

• Item Code: Astero1-3MP

Product Details:

We are the highly coveted and widely acclaimed for offering RO Logic Controller. This is available in a variety of models and can also be customized as per the specific requirements of our clients. This product is manufactured by our expert personnel using the best quality raw material and advanced technology in our sophisticated manufacturing unit in order to meet the industry specified parameters. Further this range is available in market at pocket friendly rates.

Features:

• Complete RO operating logic in built
• 2 Line alphanumeric display with keypad for programming & display
• Mimic diagram with 8 LED annunciator
• In built conductivity meter
• In built Flow meter 2 channel
• In built pH/Temperature/Pressure
• In built ORP/Temperature/Pressure
• RS 485 output for remote data transfer
• Remote monitoring (optional)
• SMS alerts (optional)

Additional Information:

• Item Code: RO-Matic

Product Details:

Backed by our rich industrial experience in this domain we are committed towards offering finest quality Aestro Logic Controller. It is a digital computer which is used for the automation process in electromechanical process. This controller is well tested against every quality parameter to avoid any type of fault at the clients' end. Our offered product can avail by our clients at pocket friendly prices in various specifications as per their needs.

Astero 1 (P)/3(P) MP controller is ideal suited for small RO/Automatic water treatment plants:

Features:

• Start/Stop button
• LS/PS bypass switch to bypass Low pressure switch/Level switch
• LED indications for Power/Pump running OK/LPS/HPS/Overload/Auto flushing
• Built in Auto flushing time-selectable
• Delay timer to protect HPP against power surges and chattering
• High pressure pump will trip only if LPS remains off more than 5-7 sec. Hence avoid any chattering of pump

Product Details:

We are offering Astero Wall Mounted Controller for our valuable clients. Our range of Astero Wall Mounted Controller are made of superior grade raw materials, which ensures the durability and efficient performance of our range.

Features:

• Astero microprocessor based controllers are ideally suited for small and medium sized RO plants
• Complete operating logic of the process is pre programmed
• Notification for filter backwash and due plant service
• Inputs from LPS, HPS and Level Switch (LS)
• Four outputs in the correct operating sequence namely Raw water pump (RWP), High pressure pump (HPP) Flushing solenoid valve (RL2) and Transfer Pump (TP), Cleaning Pump (CP)/Doser
• The electronics take care of required motor protection such as overload, dry running, single phasing and high conductivity
• Debounce time (In built debounce time to avoid chattering of high pressure pump contactor due to initial dipping in suction pressure)
• Time based flushing
• New improved RO controllers with additional features such in built conductivity, one auxiliary input (can be configured as RWLVL, RL2, ORP, Dosing, TP I/P) & more

Other Applications:

• Auto multiport Valve
• Hydropneumatic
• Ultra Filtration
• Waste water treatment